These grips are ergonomically designed for straight, swept and riser handlebars. Genuine, supple Brooks leather has been fused with an ergonomic rubber base for exceptional comfort and a delicate touch. They're fastened by an aluminum handlebar end clasps. - Size: 130mm/100mm
These grips are ergonomically designed for straight, swept and riser handlebars. Genuine, supple Brooks leather has been fused with an ergonomic rubber base for exceptional comfort and a delicate touch. They're fastened by an aluminum handlebar end clasps in satin silver or copper-coloured finish. - Size: 130mm/130mm
In the Brooks tradition, these grips are made of natural leather, the same long-wearing leather used for Brooks saddle tops. Each grip is made with a stack of leather washers. These washers are held together by 3 spokes, enabling the grip to be adjusted to the desired length. The standard length of each grip is 130mm, but each grip can be shortened to the desired length independently. The grips are delivered in a box containing shorter 80mm spokes to make them even shorter. - Adjustable Length from 80 mm to 130 mm - Inner Diameter: 22.2 mm - Weight: 290g per Pair
Brooks Slender Leather Grips feature vegetable-tanned leather tape, and are designed to offer an alternative performance option for the user, while maintaining the standard for sustainability set by the Plump Grips, allowing the user to replace worn parts if necessary. The design incorporates an aluminum shell around which the bar tape is wrapped in the manner of traditional handlebar tape. The leather is then held in place by aluminum and steel clamps which can be removed in the event that the tape requires replacement. The tape is made from the same vegetable-tanned leather used for Brooks Saddles and natural cork. Made in Italy.
Full-size bar end with L bend for maximum ergonomics when touring or on a fitness bike. Re-engineered, and improvements were made to the product with enhanced ergonomics, function, and a premium feel. The GP5 is now integrated with a bar end with an installation friendly clamping system, as well as the rest of the Ergon bar end models. This makes fitting extremely simple. Carbon Bar Compatible.
Bring the stylish comfort of a well-worn baseball glove to your ride with Portland Design Works' ergonomic Whiskey Grips. They're made from classically stitched, vegetable-tanned leather with polished aluminum lockrings for durability and a finish that'll only improve with age.
The Ergon grip with a 3-finger bar end provides a wide range of use, ranging from mountain bikes to fitness to touring bikes. The bar end angle can be adjusted independently from the angle of the grip for the perfect personal fit and the bar end doubles as a clamp to lock the grip in place and prevent movement while riding. Like all the grips in the GP-Series, the GP3 eliminates numb hands, aching fingers, and tired forearms. The GP3 is made from 100% German, TÜV-certified rubber compounds of the purest quality. - Carbon bar compatible - Clamp: fiberglass composite with rubber inserts - Uses: touring, commuting
The compact 2-finger bar end is made out of a durable fiberglass reinforced composite, with an anti-slip rubber grip. Offering an extra hand position for increased leverage and comfort. Compatible with carbon handlebars, and significantly simpler fitting, thanks to a new inner core. New lightweight rubber compound – made in Germany.
- Classically styled top grain leather grips with contrast stitching - Dual alloy hex bolt lock rings securely attach grip to bar - 130mm length with 32mm diameter grip area - Includes bar end plugs
The Cambium Comfort Grip! Organic cotton canvas is vulcanized and bonded to organic rubber to provide superior comfort and style. 100mm set for use with dual grip shifting systems and handlebars with shorter contact area, such as Brompton "M-Type" handlebars.
Brooks' best rubber handlebar grips with organic cotton for a natural look and feel. Full 130mm set.
Brooks' best rubber handlebar grips with organic cotton for a natural look and feel. The 130mm/100mm set is for use with grip shifters.
Whether you ride like a thrasher or just kick it around town, the Speed Metal Grips from Portland Design Works will improve your grip and style. The ergonomic metal thumb grooves are extra comfy and the rubber inserts add just the right amount of cushion and grip.
The bar end of the GP2 has been re-engineered, and improvements made to the product – better ergonomics, function and a higher quality feel. The GP2 now has a bar end with an installation friendly clamping system – as do all Ergon bar end models. This makes fitting extremely simple. Carbon bar compatible.
Fabric's XL lock-on grip is ideal for wider bars. The soft kraton rubber logo increases comfort and a hidden aluminium clamp provides maximum surface area. Their unique 3 shot manufacturing process provides an extra durable, dual density grip. -Diameter: 31mm -Length: 145mm
$26.95 - $32.95
Two Southern California originals have teamed up to create a modern-day classic design. Featuring the classic Vans waffle sole pattern and constructed from ODI's proprietary grip compounds for a consistent feel that provides exceptional control in all conditions. Available as part of the patented Lock-On Grip System for guaranteed slip-free performance and simple installation. For MTB, BMX, ATV, and PWC applications. - Iconic Vans Waffle sole pattern utilizing ODI's proprietary grip compounds - Provides exceptional feel and control in all conditions - Aluminum clamps secure the grip on both ends using a hex wrench
ESI's new fit grips are designed for a completely natural hand position on your handlebar. Our new design balances the pressure that your hands exert onto the handlebars, increasing bar control dramatically. Fit grips have three distinct areas: INNER - This area is the perfect step up for your hands to rest against for maximum bar control in turns. MIDDLE - This area is perfect for extra torque and powering while climbing. OUTER - This thickest area is for better hand comfort, especially while descending. Each area of the fit grip flows flawlessly into each other creating the perfect hand placement naturally. Your hands instantly feel comfort when they grasp their unique shape, as if they were exclusively molded for your hands.
- Lightweight silicone grips that conform to your hand for maximum grip and shock absorption to reduce hand fatigue and arm pump - UV resistant and non-porous, they will not fade or harden - Non-slip grip compound that stays put even when wet - Fit XC: 13
- Developed in collaboration with 2x World Cup Champion Aaron Gwin - Ergonomic single clamp design with aluminum reinforced ends - Angled rib pattern matches the articulation points of your hand - Bonus pack includes Lock-On grips and v2.1 clamp
PDW's Cork Chop Grips pair classic, vintage style with grippy ergonomics. Pop the cork and relieve the pressure: It's a celebration. • 142 grams • 5-inches in length • Cork/rubber compound
The original ergonomic grip – continually improved over the last few years. As the worldwide standard in ergonomic function, materials and quality, the GP1 has a new internal structure. More comfort is ensured by the three-part internal support platform with varying wall thickness. German-made rubber compound is of the purest quality. Forged aluminium clamps, unlike the pressed clamps preferred by the copies.
Get extra support on the ride with the Ergo lock-on grip. A broad, flat pad braces your palm at the outer edge of the handlebar. Further support comes from its shock-absorbing silicone construction, while scuff-resistant bar end plugs prevent the bike slipping when propped up. - 100% silicone grip - Ergo palm pad - Lock-on clamp - Bumper bar ends - Durable and tough - Diameter: 30mm - Length: 135mm - Weight: 116g pair
Get extra grip and support on the ride with the Semi ergo grip. Shaped to follow the contours of your hand, the subtly ergonomic, Hex-patterned grip is made from medical-grade silicone, making it both ultra grippy and supportive. - 100% silicone - Hex pattern - Ergonomic shape - Durable and tough - Bumper bar ends - Diameter: 32mm - Length: 135mm - Weight: 96g pair
- 30.3Mm thick durasoft polymer (Dsp) - Micro-Chevron grip pattern for superior comfort, Feel and control - Ultra lightweight at 27 grams per set - Includes plugs and double sided tape
The MacAskill grip features a larger diameter in key areas of the grip to provide better cushioning for impacts and vibration dampening. - Designed and ridden by Danny MacAskill - Single sided lock on grip - 29–30mm diameter
Feel the comfort of Lizard's popular Charger grip. The unique pattern gives the Charger grip an amazingly comfortable feel that is soft yet long lasting. Lock-on grips include the grips, clamps, screws and plugs. Length: 130 mm Weight (with plugs): 105 grams Diameter: 31.25 mm
Darren Berrecloth is a legendary freerider who has competed in nearly every major freeride event and has created some of the most memorable moments in mountain biking. We are thrilled to introduce the new Lizard Skins "Bearclaw" lock-on grips. These grips have been designed and created to Darren's specifications and are our thinnest lock-on grips. Not only do these grips feature a comfortable low profile, they also have an extremely comfortable pattern and compound for use with or without gloves. Length: 130 mm Weight (with plugs): 105 grams Diameter: 29.5 mm
Experience what so many cyclists are using, the Logo grip. It satisfies many riders providing durability. This is a great grip for those with medium-sized hands. Lock-on grips include the grips, clamps, screws and plugs. - Length: 130 mm - Weight (with plugs): 120 grams - Diameter: 31.5 mm
Lizard's new Moab grip is inspired by the famous Delicate Arches that exist in Moab, Utah. The Moab grip has a raised texture and works well for those who want a comfortable and forgiving grip. A percentage of the proceeds from the sales of this grip go to support the Moab Trails Alliance and trail building in Moab. Lock-on grips include the grips, clamps, screws and plugs. Length: 130 mm Weight (with plugs): 114 grams Diameter: 31 mm
The North Shore mountains of British Columbia are home to some of the most amazing trails in the world. We are not only excited to announce the redesigned Northshore grip but also our new partnership with the North Shore Mountain Biking Association. A percentage of the proceeds from the sales of these grips are used to support the NSMBA and the trail building on the North Shore. The new Northshore grip is our thickest lock-on grip and features a series of textured shock absorbing sections to provide a comfortable and controlled ride. Length: 130 mm Weight (with plugs): 125 grams Diameter: 33 mm
Page 1 of 6 Next page